Part Number Hot Search : 
TP8482 25PT16A X1624 DSPIC3 BEFVAA4 2SJ518 2N22907 MCR10
Product Description
Full Text Search
 

To Download L2724 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 L2720/2/4
LOW DROP DUAL POWER OPERATIONAL AMPLIFIERS
.OUTPUTCURRENTTO1A .OPERATESATLOWVOLTAGES .SI .LARGE .LOWI .GROUNDCOMPATI .LOWSATURATI .THERMALSHUTDOWN .CLAMPDI
ODE DESCRIPTION
NGLE OR SPLIT SUPPLY COMMON-MODE AND DIFFERENTIAL MODE RANGE NPUT OFFSET VOLTAGE BLE INPUTS ON VOLTAGE
PO WERDIP (8 + 8)
MINIDIP (Plastic)
The L2720, L2722 and L2724 are monolithic integrated circuits in powerdip, minidip and SIP-9 packages, intended for use as power operational amplifiers in a wide range of applications including servo amplifiers and power supplies. They are particularly indicated for driving, inductive loads, as motor and finds applications in compactdisc VCR automotive, etc. The high gain and high output power capability provide superior performance whatever an operational amplifier/power booster combination is required. PIN CONNECTIONS (top views)
SIP9
ORDERING NUMBERS :
L2720 (Powerdip) L2722 (Minidip) L2724 (SIP9)
L2720
L2722
L2724
November 1996
1/10
L2720/2/4
BLOCK DIAGRAM L2720 L2722 L2724
SCHEMATIC DIAGRAM (one section)
ABSOLUTE MAXIMUM RATINGS
Symbol VS VS Vi Vi Io Ip Ptot Supply Voltage Peak Supply Voltage (50ms) Input Voltage Differential Input Voltage DC Output Current Peak Output Current (non repetitive) Power Dissipation at Tamb = 80 C (L2720), Tamb = 50 C (L2722) Tcase = 75oC (L2720) o Tcase = 50 C (L2724) Storage and Junction Temperature
o o
Parameter
Value 28 50 Vs Vs 1 1.5 1 5 10 -40 to 150
Unit V V
A A W
o
Tstg, Tj 2/10
C
L2720/2/4
THERMAL DATA
SIP-9 Rth j-case Rth j-amb Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max. Max. 10 C/W 70 C/W
o o
Powerdip 15 C/W 70 C/W
o o
Minidip 70 C/W 100 C/W
o o
ELECTRICAL CHARACTERISTICS Vs = 24V, Tamb = 25oC unless otherwise specified
Symbol Vs Vs Is Ib Vos Ios SR B Ri Gv eN IN CMR SVR Parameter Single Supply Voltage Split Supply Voltage Quiescent Drain Current Input Bias Current Input Offset Voltage Input Offset Current Slew Rate Gain-bandwidth Product Input Resistance O.L. Voltage Gain Input Noise Voltage Input Noise Voltage Common Mode Rejection Supply Voltage Rejection f = 100Hz f = 1kHz B = 22Hz to 22kHz f = 1kHz f = 100Hz R G = 10k VR = 0.5V Vs = 2.5V to 12V Vs = 2.5V to 12V Channel Separation f = 1KHz R L = 10 Gv = 30dB Vs = 24V Vs = 12V Vs = 6V Ip = 100mA Ip = 500mA Ip = 100mA Ip = 500mA Vs = 24V Vs = 6V 66 60 500 70 80 60 10 200 84 70 75 80 0.7 1 0.3 0.5 60 60 1.5 V 1 dB
o
Test Conditions
Min. 4 2
Typ.
Max. 28 14
Unit V V mA
Vs Vo = 2
Vs = 24V Vs = 8V
10 9 0.2
15 15 1 10 100 A mV nA V/s MHz k dB V pA dB dB
2 1.2
VDROP(HIGH) VDROP(LOW) Cs
V
Tsd
Thermal Shutdown Junction Temperature
C
145
Figure 1 :
Quiescent Current vs. Supply Voltage
FIgure 2 :
Open Loop Gain vs. Frequency
3/10
L2720/2/4
Figure 3 : Common Mode Rejection vs. Frequency Figure 4 : Output Swing vs. Load Current (VS = 5 V.
Figure 5 :
Output Swing vs. Load Current (VS = 12 V.
Figure 6 :
Supply Voltage rejection vs. Frequency
Figure 7 :
Channel Separation vs. Frequency
4/10
L2720/2/4
APPLICATION SUGGESTION In order to avoid possible instability occuring into final stage the usual suggestions for the linear power stages are useful, as for instance :
-
-
layout accuracy ; A 100nFcapacitor connectedbetweensupply pins and ground ;
boucherot cell (0.1 to 0.2 F + 1 series) between outputs and ground or across the load. With single supply operation, a resistor (1k) between the output and supply pin can be necessary for stability.
Figure 8 :
Bidirectional DC Motor Control with P Compatible Inputs
VS1 = logic supply voltage Must be VS2 > VS1 E1, E2 = logic inputs
Figure 9 :
Servocontrol for Compact-disc
Figure 10 : Capstan Motor Control in Video Recorders
Figure 11 : Motor Current Control Circuit
No te :
The input voltage level is compatible with L291 (8 - BIT D/A converter)
5/10
L2720/2/4
Figure 12 : Bidirectional Speed Control of DC Motors 2R3 . R1 For circuit stability ensure that RX > RM The voltage available at the terminals of the motor is VM = 2 (VI - and IM is the motor current. VS ) + |RO|. IM where |RO| = 2 RX where RM = internal resistance of motor. 2R3 . R1
Figure 13 : VHS-VCR Motor Control Circuit
6/10
L2720/2/4
POWERDIP 16 PACKAGE MECHANICAL DATA
DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.30 1.27 8.80 2.54 17.78 7.10 5.10 0.130 0.050 0.38 0.51 0.85 0.50 0.50 20.0 0.346 0.100 0.700 0.280 0.201 0.015 1.40 mm TYP. MAX. MIN. 0.020 0.033 0.020 0.020 0.787 0.055 inch TYP. MAX.
7/10
L2720/2/4
MINIDIP PACKAGE MECHANICAL DATA
DIM. MIN. A a1 B B1 b b1 D E e e3 e4 F I L Z 0.44 3.3 1.6 0.017 8.8 2.54 7.62 7.62 7.1 4.8 0.130 0.063 0.38 0.7 1.39 0.91 0.5 0.5 9.8 0.346 0.100 0.300 0.300 0.280 0.189 0.015 1.65 1.04 mm TYP. 3.3 0.028 0.055 0.036 0.020 0.020 0.386 0.065 0.041 MAX. MIN. inch TYP. 0.130 MAX.
8/10
L2720/2/4
SIP9 PACKAGE MECHANICAL DATA
DIM. A a1 B B3 b1 b3 C c1 c2 D d1 e e3 L L1 L2 L3 L4 M N P MIN. 2.7 mm TYP. MAX. 7.1 3 23 24.8 1.6 3.3 0.43 1.32 21.2 14.5 2.54 20.32 3.1 3 17.6 17.4 3.2 1 0.15 0.25 17.85 0.685 0.126 0.039 0.006 0.122 0.118 0.693 0.010 0,702 0.571 0.100 0.800 MIN. 0.106 inch TYP. MAX. 0.280 0.118 0.90 0.976 0.063 0.130 0.017 0.052 0.835
0.5 0.85 0.033
0.020
D L3 c2
C
L1
N P
M d1
L4
L2
a1
1
9
L
b1 b3 e3 B B3
SIP9
e
A c1
9/10
L2720/2/4
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. (c) 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
10/10


▲Up To Search▲   

 
Price & Availability of L2724

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X